شرح عمل اتصال Vpn للانظمه التشغيل
الاكثر استخداما
1- Windows XP
Choose Start > Connect To > Show All Connections
Click on "Create a new connection" on the left hand side
Choose "Connect to the network at my workplace" and click "Next".
Choose "Virtual Private Network connection" and click "Next"
Enter a name for the VPN connection (e.g. "VPNReactor") and click "Next".
If you don't need to dial up to the Internet before you can connect to VPNReactor, Choose "Do not dial the initial connection".
Enter "vpn.vpnreactor.com" as the VPN server host name and click "Next".
Check "Add a shortcut to this connection to my desktop" if desired, then click "Finish".
You should now disable "File and Printer Sharing" as it can pose as a security issue. Open the newly created VPNReactor connection and click "Properties". Click on the "Networking" tab, uncheck the "File and Printer Sharing for Microsoft Networks" and Click Ok.
- To use VPNReactor, Enter your VPNReactor user name and password and click "Connect".
---------------------------------------------------------------------------------------------------------------------------------
2-Window 7
Click "Start" menu
Select "Computer"
Right click "Network" on the left hand side and Select 'Properties'
Click "Setup a new connection or network"
Select "Connect to a workplace" and click 'Next'
Click "Use my Internet connection (VPN)"
Type in the Internet address: vpn.vpnreactor.com and Destination name: VPNReactor
Enter your VPNReactor username and password in 'Username' and 'Password' field and click "Connect"
Now you are connected to VPNReactor.
To disconnect the VPN click the little computer in right side of your taskbar and click 'Disconnect'
------------------------------------------------------------------------------------------------------------------------------------
3-
| |
Connecting OSX
- Click "System Preferences"

- Select "Network"

- Click on the plus symbol in the lower left corner to add a new connection. (Note: you may need to click the lock icon in the lower left to unlock the preference pane and make changes.)

- Under "Interface" select "VPN".

- Set the VPN Type: PPTP and Service Name: VPNReactor and Click 'Create'

- The window will now show a place for the Server Address, and Account Name. Set Server Address: vpn.vpnreactor.com and type your VPNReactor username in the field Account Name.

- Click on "Authentication Settings" to set "Password"

- Enter your VPNReactor password in 'Password' field then Press "OK" and Click the checkbox for "Show VPN status in menu bar" (if desired)

- Click "Advanced"

- Click "Options" tab and check "Send all traffic over VPN connection"

- Now click "TCP/IP" tab and set IPv6 to "OFF", then OK

- Click "Apply" in the lower right corner.

- To use VPNReactor, Click "Connect VPNReactor "
----
|
| |
------------------------------------------------------------------------------------------------------------------------------------------- |
|
|
اجعل مدونتك افضل مدونة مع التصاميم المجانية و الاضافات الجديدة و الدعم الفني المجاني فقط على منتديات
اتقان بلوجر
0 التعليقات :
إرسال تعليق